Mara_Website_Header_LY1_10375.jpg

Mimaki UJF-3042FX

FEATURES

Direct printing of variable data on everything


UJF-3042FX

 

 

UJF-3042FX ensures that you can respond to your clients requirements for single or short run digital printing enhancing a multitude of products (including molded items), substrates and media up to 50 mm thickness with personalised messages.

 

 

Head gap should be 1.5mm maximum

*Note: Head gap should be 1.5mm maximum of our recommendation.
For wider, please test in advance as print quality decreases when gap is wider.

 


Simultaneous white ink under and overprint


Print outstandingly colorful, bright images on transparent and colored substrates with white ink under or overprint that do not slow down print speed.


UJF-3042FX

<h4 id="h702" style="margin-top: 0px; margin-bottom: 10px; font-size: 13px; line-height: 1.3em;"></h4>

<h4 id="h702" style="margin-top: 0px; margin-bottom: 10px; font-size: 13px; line-height: 1.3em;">Staggered Print Head Arrangement</h4>

Fast and accurate printing with new print heads that accommodate full color and white in two lines thus doubling print speed.

*For SP, enable to insert White or Clear ink

<h4 id="h705" style="margin-top: 0px; margin-bottom: 10px; font-size: 13px; line-height: 1.3em;"></h4>

<h4 id="h705" style="margin-top: 0px; margin-bottom: 10px; font-size: 13px; line-height: 1.3em;">Reverse print functionality</h4>

Select the order of overand underprint with white in RasterLinkPro5 (included standard RIP software) and the most efficient path is determined by the software.
Experience efficient high productivity without further operator intervention.


UJF-3042FX

 

 


UJF-3042FX

<h4 id="h708" style="margin-top: 0px; margin-bottom: 10px; font-size: 13px; line-height: 1.3em;">White over and underprinting</h4>

Without white ink as a basis for overprinting, the colors are not as vivid as they could be.

 

 


UJF-3042FX

With the white ink overlay print, the image is bright and vivid.


 

Add value with layered finishes


UJF-3042FX

Offer higher value prints to your customers:
Different layer printing enabling haptic surfaces will impress your clients.


Ink mist assorption filter


UJF-3042FX is equipped withInk mist assorption filter for higher print reliablity, consistency and quality.

 

SPECIFICATIONS

 

UJF-3042FX

Head

On-demand Piezo head

Print resolution

720 × 600 dpi, 1,440 × 1200 dpi

Ink

Hard UV curable ink : LH-100, LF-140, LF-200

Ink capacity

220 ml / cartridge

Maximum print width

Width : 300 mm (11.8 "), Length : 420 mm (16.5 ")

Media

Width

Width : 364 mm (14.3 "), Length : 463 mm (18.2 ")

Thickness

Max. 50 mm (1.97 ")

Weight

Less than 5 kg (11 lbs)

Set device

Air suction by vacuum

UV device

Equipped with UV Light Emitting Diodes

Interface

USB 2.0

Applicable standard

VCCI class A, FCC class A, UL, RoHS Directive, CE Marking

Power specifications

AC 100 - 240 V (Automated voltage conversion)

Power consumption

Less than 350 VA

Operational environment

Temperature

20 - 35 °C (68 - 95 °F)

Humidity

35 - 65 % Rh

Dust

Equivalent to normal office level

Weight

Approx. 113kg (249.1 lbs.)

Dimensions (W x D x H)

1,200 mm x 1,090 mm x 770 mm (47.2 " x 42.9 " x 30.3 ")

Want more information? Call 1-888-253-2778 today.

 

Email us at: 

contact-mna(at)marabu.com

 

Or use our Contact Form

 

 

Additional Information

  • All trademarks or registered trademarks are the property of their respective owners.
  • Specifications are subject to change without notice.
  • Some of the screens and printing samples in this website are artificial renderings.
  • Inkjet printers print using extremely fine dots, thus colors may vary slightly following replacement of the printing heads. Also note that if using multiple printer units, colors may vary slightly among the units due to slight individual differences among the units.
     

Inks and Substrates

  • Please note that properties and adhesion, weather resistance etc. of ink and substrates can vary. Therefore please test materials before printing.
  • Some substrates require primer before printing. Please test materials beforehand or ask your sales representative.

Safety Notice

You are dealing with UV light sources that may harm your health.  Please follow below guidelines strictly:

  • Do not look directly into the UV light source nor place your hand, or expose your skin directly to the UV light source.
  • Depending upon print mode, there might occur some VOC emittance from printed parts not yet cured and hardened.
  • In addition, please read the instructions and guidelines of the manual carefully and follow those.